High Performance Tube - Integrally finned tubing

Products

Type 1 30 FPI Fine-Fin

Type 1 30 FPI Fine-Fin ^Ž MATERIALS: Titanium; Zirconium; C-276; G30; B-2; C-22; 20Cb-3; AL6XN	30	fins per inch
	1181	fins per meter
	032	(inches) average fin height
	.813	(mm average fin height
	.011	(inches) average fin thickness
	.279	(mm) average fin thickness

Part Number	Plain Section Average Diameter	Plain Section Average Wall	Wall Under Fin Average	Wall Under Fin Minimum	Nominal Root Diameter	Fin Section I.D.	Outside Area Ao	Inside Area Ai	Area Ratio Ao/Ai	I.D. Cross Section Area
	(Inches)	(Inches)	(Inches)	(Inches)	(Inches)	(Inches)	(Ft ² /Ft)	(Ft ² /Ft)		(Inches ² )
	(mm)	(mm)	(mm)	(mm)	(mm)	(mm)	(m ² /m)	(m ² /m)		(cm ² )
304028	.625	.049	.028	.025	.561	.505	.411	.132	3.114	.200
	15.875	1.245	.711	.635	14.249	12.827	.125	.040		1.292
304035	.625	.058	.035	.031	.561	.491	.411	.129	3.186	.189
	15.875	1.473	.889	.787	14.249	12.471	.125	.039		1.222
304042	.625	.065	.042	.037	.561	.477	.411	.125	3.288	.179
	15.875	1.651	1.067	.940	14.249	12.116	.125	.038		1.153
304049	.625	.072	.049	.044	.561	.463	.411	.121	3.397	.168
	15.875	1.829	1.245	1.118	14.249	11.760	.125	.037		1.086
304065	.625	.083	.065	.058	.561	.431	.411	.113	3.637	.146
	15.875	2.108	1.651	1.473	14.249	10.947	.125	.034		.941

305028	.750	.049	.028	.025	.686	.630	.500	.165	3.030	.312
	19.050	1.245	.711	.635	17.424	16.002	.152	.050		2.011
305035	.750	.058	.035	.031	.686	.616	.500	.161	3.106	.298
	19.050	1.473	.889	.787	17.424	15.646	.152	.049		1.923
305042	.750	.065	.042	.037	.686	.602	.500	.158	3.165	.285
	19.050	1.651	1.067	.940	17.424	15.291	.152	.048		1.836
305049	.750	.072	.049	.044	.686	.588	.500	.154	3.247	.272
	19.050	1.829	1.245	1.118	17.424	14.935	.152	.047		1.752
305065	.750	.083	.065	.058	.686	.556	.500	.146	3.425	.243
	19.050	2.108	1.651	1.473	17.424	14.122	.152	.045		1.566
305083	.750	.109	.083	.074	.686	.520	.500	.136	3.676	.212
	19.050	2.769	2.108	1.880	17.424	13.208	.152	.041		1.370

306028	.875	.049	.028	.025	.811	.755	.587	.198	2.965	.448
	22.225	1.245	.711	.635	20.599	19.177	.179	.060		2.888
306035	.875	.058	.035	.031	.811	.741	.587	.194	3.026	.431
	22.225	1.473	.889	.787	20.599	18.821	.179	.059		2.782
306042	.875	.065	.042	.037	.811	.727	.587	.190	3.089	.415
	22.225	1.651	1.067	.940	20.599	18.466	.179	.058		2.678
306049	.875	.072	.049	.044	.811	.713	.587	.187	3.139	.399
	22.225	1.829	1.245	1.118	20.599	18.110	.179	.057		2.576
306065	.875	.083	.065	.058	.811	.681	.587	.178	3.298	.364
	22.225	2.108	1.651	1.473	20.599	17.297	.179	.054		2.350
306083	.875	.109	.083	.074	.811	.645	.587	.169	3.473	.327
	22.225	2.769	2.108	1.880	20.599	16.383	.179	.052		2.108

307035	1.000	.058	.035	.031	.936	.866	.671	.227	2.956	.589
	25.400	1.473	.889	.787	23.774	21.996	.205	.069		3.800
307042	1.000	.065	.042	.037	.936	.852	.671	.223	3.009	.570
	25.400	1.651	1.067	.940	23.774	21.641	.205	.068		3.678
307049	1.000	.072	.049	.044	.936	.838	.671	.219	3.064	.552
	25.400	1.829	1.245	1.118	23.774	21.285	.205	.067		3.558
307065	1.000	.083	.065	.058	.936	.806	.671	.211	3.180	.510
	25.400	2.108	1.651	1.473	23.774	20.472	.205	.064		3.292
307083	1.000	.109	.083	.074	.936	.770	.671	.202	3.322	.466
	25.400	2.769	2.108	1.880	23.774	19.558	.205	.062		3.004


D - Outside Diameter of Plain End	W - Wall Thickness of Plain End
D _i - Inside Diameter of Plain End	W _f - Wall Thickness Under Fin
d _r - Root Diameter	F _h - Height of Fin
d _o - Diameter Over Fins	F _m - Mean Fin Thickness
d _i - Inside Diameter of Fin Section
DEFINITION OF HPT PART NUMBER Example: 365028
36: fins per inch 5: root diameter (reference) in eights of a n inch 028: wall thickness under fin in thousands of an inch